Guangshengde induction cooker assembly aging production line is a production line that can complete the assembly, aging and packaging of induction cookers. The main structure of Guangshengde induction cooker assembly aging production line includes: main line body, compatible tooling plate, 90° corner machine and lift, aging line area and induction cooker test station area. The following mainly explains the selection and production of the theme of the induction cooker assembly aging production line.

Structure diagram of induction cooker assembly aging production line

The main line body of the assembly aging production line of Guangshengde induction cooker

1. Power mechanism of induction cooker assembly aging production line: the power adopts 5HP Kun gear reduction motor, V=10m/min (chain speed), 2 sets are counted. Aging line power mechanism: power adopts 2HP Kun gear reduction motor, V=10m/min (chain speed), sprocket 6', Z=13-17, active drive sprocket P=38.1, Z=9, bearing seat UCP208 , Cover plate & 1.2 cold-rolled plate bending forming, drive shaft Ø45*560;

2. Tension mechanism of induction cooker assembly aging production line: machine tailstock 40*40*&1.5mm square through welding, tension screw tension, sprocket P=38.1, Z=9;

3. Induction cooker assembly aging production line frame: the bracket adopts 40*40*&2.0mm square-through welding

4. Guide rail for induction cooker assembly aging production line: aluminum alloy guide rail 100*118 aluminum profile with positive surface treatment.

5. Conveyor chain of induction cooker assembly aging production line: triple-speed nylon low-noise chain P=38.1 (big black and small blue).

6. Small stopper for induction cooker assembly aging production line: Ø50mm*30mm single-acting with buffer cylinder is installed, each station is installed, when a fixture plate enters, block the fixture plate, the support plate of the stopper is folded by 3mm thick steel plate forming. Each blocker can be controlled manually and automatically;

7. Large blocker for induction cooker assembly aging production line: Ø30mm*30mm single-acting horizontal cylinder is used to reduce the impact of the tooling board during operation. The cylinder is assisted by a stroke switch and a two-position three-way solenoid valve 3V210/220V control, and the blocker carrying plate adopts 3mm thick steel plate is folded into shape, a total of 2 sets.

8. Induction cooker assembly aging production line collector rail: support frame <40*3 welding, height adjustable, 800mm interval, special aluminum alloy guide rail and orange plastic cover, and cover, conductive wheel A-05 unidirectional, torsion spring type Inclined lever type, good conductivity and durability, with an interval of 150mm, arranged in 5 rows;

9. Induction cooker assembly aging production line movable door panels: movable observation door panels are installed on both sides of the aging line body; the upper part is sealed, and the PVC pipe is directly connected to the ventilation pipe.

10. Electrical control of induction cooker assembly aging production line: the main line of the line body is a three-phase five-wire system, with reliable grounding, the electrical wiring should be neat and clear, and the control switches, buttons, indicator lights, etc. are clearly marked. The design, manufacture and installation of all electrical distribution boxes and main control cabinets shall comply with electrical technical safety standards.

Induction cooker assembly aging production line

To learn more about the induction cooker production line that integrates assembly, aging and packaging developed by Guangshengde, please contact Guangshengde.